The maximum radial load carrying capacity of the NNF series cylindrical roller bearings is accomplished through the full complement design, i.e. a maximum number of rollers is fitted within the available crossection. They are suitable for low to medium speeds and can take up axial forces and tilting moments in both directions. To prevent dust and splash water from entering the bearings, the NNF series is equipped with contacting seals on both sides. A special grease allows the bearings to operate under extreme conditions. Lubrication holes in the outer and inner ring enable easy re-lubrication through shaft and housing.
Rope wheels and pulleys are typical application examples for NNF series double row full complement cylindrical roller bearings. Due to the narrower outer ring, additional sleeves or distance pieces are not required. Two snap ring grooves on the outer ring simplify the bearing arrangement design for sheaves. For better corrosion protection, the bearings are also available with a special, RoHS compliant anti-corrosion coating SQ171. Black oxide coating can also be realised to optimise the tribological characteristics of the bearings. Further more, the bearings can be manufactured in application specific clearance and tolerance classes.
Bearing specialist NKE AUSTRIA develops and manufactures both standard and special bearings for all industrial applications. In addition to product development and application engineering NKE provides a full range of technical services and training. NKE’s products are distributed through 15 international representative offices and more than 240 distribution outlets in 60 countries.